Tubingen, on November 10, 2015 - new fund BMT/DO machine uses Waerte cut off cutting tool knife handle to contain two main innovation: Knife handle is contained inside cold passageway, cooling fluid arrives directly at cutting area. These two abidance that innovate to be grooving razor blade and knife plate are optimal and cooling make crucial contribution. The O form sealing ring that takes the cold, can carry cooling fluid directly new fund BMT/DO inside nicety to cut off knife handle of cutting tool knife handle to go up can ensure carry cooling fluid reliably, avoided pressure loss. To different applied situation, knife handle also can be used outside cold, inside cold outside mixing cold OK and mutual changeover, need to shut only use at inside cold cooling fluid passageway can. No matter be in the standard installation position is returned,the design of this system makes is retrorse installation position, handlers needs an arbor only. The other good point of this knife handle: Arbor center Gao Ke is adjusted with undertaking according to the need of different spare parts (+ / - 0. 5 Mm) . Accordingly, need not add the job finds the central place that needs treatment work well and truly. In use Waerte new fund BMT/DO cuts off cutting tool knife handle when treatment, inside nicety of cold generation cut bits particularly short, cutting tool wears away reduce. Because of this leave out clear the machine down time that when cutting bits, needs, the machine tool produces efficiency to rise. Arbor design is strong, apply to all sorts of operating mode, still can eliminate when treatment shake, cover with tiles Er spy new fund cuts off cutting tool knife handle to be in the 10 cooling fluid to 80 Bar work below pressure. The groovy machine tool that because this is almost all,takes BMT interface can use this kind of knife handle. CNC Milling
CNC Machining